ABI
Tracker

(FFmpeg)




Changelog for 2.6.1 version



Entries are sorted chronologically from oldest to youngest within each release,
releases are sorted from youngest to oldest.

version 2.6.1:
- avformat/mov: Disallow ".." in dref unless use_absolute_path is set
- avfilter/palettegen: make sure at least one frame was sent to the filter
- avformat/mov: Check for string truncation in mov_open_dref()
- ac3_fixed: fix out-of-bound read
- mips/asmdefs: use _ABI64 as defined by gcc
- hevc: delay ff_thread_finish_setup for hwaccel
- avcodec/012v: Check dimensions more completely
- asfenc: fix leaking asf->index_ptr on error
- roqvideoenc: set enc->avctx in roq_encode_init
- avcodec/options_table: remove extradata_size from the AVOptions table
- ffmdec: limit the backward seek to the last resync position
- Add dependencies to configure file for vf_fftfilt
- ffmdec: make sure the time base is valid
- ffmdec: fix infinite loop at EOF
- ffmdec: initialize f_cprv, f_stvi and f_stau
- arm: Suppress tags about used cpu arch and extensions
- mxfdec: Fix the error handling for when strftime fails
- avcodec/opusdec: Fix delayed sample value
- avcodec/opusdec: Clear out pointers per packet
- avcodec/utils: Align YUV411 by as much as the other YUV variants
- lavc/hevcdsp: Fix compilation for arm with --disable-neon.
- vp9: fix segmentation map retention with threading enabled.
- Revert "avutil/opencl: is_compiled flag not being cleared in av_opencl_uninit"

version 2.6:
- nvenc encoder
- 10bit spp filter
- colorlevels filter
- RIFX format for *.wav files
- RTP/mpegts muxer
- non continuous cache protocol support
- tblend filter
- cropdetect support for non 8bpp, absolute (if limit >= 1) and relative (if limit < 1.0) threshold
- Camellia symmetric block cipher
- OpenH264 encoder wrapper
- VOC seeking support
- Closed caption Decoder
- fspp, uspp, pp7 MPlayer postprocessing filters ported to native filters
- showpalette filter
- Twofish symmetric block cipher
- Support DNx100 (960x720@8)
- eq2 filter ported from libmpcodecs as eq filter
- removed libmpcodecs
- Changed default DNxHD colour range in QuickTime .mov derivatives to mpeg range
- ported softpulldown filter from libmpcodecs as repeatfields filter
- dcshift filter
- RTP depacketizer for loss tolerant payload format for MP3 audio (RFC 5219)
- RTP depacketizer for AC3 payload format (RFC 4184)
- palettegen and paletteuse filters
- VP9 RTP payload format (draft 0) experimental depacketizer
- RTP depacketizer for DV (RFC 6469)
- DXVA2-accelerated HEVC decoding
- AAC ELD 480 decoding
- Intel QSV-accelerated H.264 decoding
- DSS SP decoder and DSS demuxer
- Fix stsd atom corruption in DNxHD QuickTimes
- Canopus HQX decoder
- RTP depacketization of T.140 text (RFC 4103)
- Port MIPS optimizations to 64-bit


version 2.5:
- HEVC/H.265 RTP payload format (draft v6) packetizer
- SUP/PGS subtitle demuxer
- ffprobe -show_pixel_formats option
- CAST128 symmetric block cipher, ECB mode
- STL subtitle demuxer and decoder
- libutvideo YUV 4:2:2 10bit support
- XCB-based screen-grabber
- UDP-Lite support (RFC 3828)
- xBR scaling filter
- AVFoundation screen capturing support
- ffserver supports codec private options
- creating DASH compatible fragmented MP4, MPEG-DASH segmenting muxer
- WebP muxer with animated WebP support
- zygoaudio decoding support
- APNG demuxer
- postproc visualization support


version 2.4:
- Icecast protocol
- ported lenscorrection filter from frei0r filter
- large optimizations in dctdnoiz to make it usable
- ICY metadata are now requested by default with the HTTP protocol
- support for using metadata in stream specifiers in fftools
- LZMA compression support in TIFF decoder
- H.261 RTP payload format (RFC 4587) depacketizer and experimental packetizer
- HEVC/H.265 RTP payload format (draft v6) depacketizer
- added codecview filter to visualize information exported by some codecs
- Matroska 3D support thorugh side data
- HTML generation using texi2html is deprecated in favor of makeinfo/texi2any
- silenceremove filter


version 2.3:
- AC3 fixed-point decoding
- shuffleplanes filter
- subfile protocol
- Phantom Cine demuxer
- replaygain data export
- VP7 video decoder
- Alias PIX image encoder and decoder
- Improvements to the BRender PIX image decoder
- Improvements to the XBM decoder
- QTKit input device
- improvements to OpenEXR image decoder
- support decoding 16-bit RLE SGI images
- GDI screen grabbing for Windows
- alternative rendition support for HTTP Live Streaming
- AVFoundation input device
- Direct Stream Digital (DSD) decoder
- Magic Lantern Video (MLV) demuxer
- On2 AVC (Audio for Video) decoder
- support for decoding through DXVA2 in ffmpeg
- libbs2b-based stereo-to-binaural audio filter
- libx264 reference frames count limiting depending on level
- native Opus decoder
- display matrix export and rotation API
- WebVTT encoder
- showcqt multimedia filter
- zoompan filter
- signalstats filter
- hqx filter (hq2x, hq3x, hq4x)
- flanger filter
- Image format auto-detection
- LRC demuxer and muxer
- Samba protocol (via libsmbclient)
- WebM DASH Manifest muxer
- libfribidi support in drawtext


version 2.2:

- HNM version 4 demuxer and video decoder
- Live HDS muxer
- setsar/setdar filters now support variables in ratio expressions
- elbg filter
- string validation in ffprobe
- support for decoding through VDPAU in ffmpeg (the -hwaccel option)
- complete Voxware MetaSound decoder
- remove mp3_header_compress bitstream filter
- Windows resource files for shared libraries
- aeval filter
- stereoscopic 3d metadata handling
- WebP encoding via libwebp
- ATRAC3+ decoder
- VP8 in Ogg demuxing
- side & metadata support in NUT
- framepack filter
- XYZ12 rawvideo support in NUT
- Exif metadata support in WebP decoder
- OpenGL device
- Use metadata_header_padding to control padding in ID3 tags (currently used in
  MP3, AIFF, and OMA files), FLAC header, and the AVI "junk" block.
- Mirillis FIC video decoder
- Support DNx444
- libx265 encoder
- dejudder filter
- Autodetect VDA like all other hardware accelerations
- aliases and defaults for Ogg subtypes (opus, spx)


version 2.1:

- aecho filter
- perspective filter ported from libmpcodecs
- ffprobe -show_programs option
- compand filter
- RTMP seek support
- when transcoding with ffmpeg (i.e. not streamcopying), -ss is now accurate
  even when used as an input option. Previous behavior can be restored with
  the -noaccurate_seek option.
- ffmpeg -t option can now be used for inputs, to limit the duration of
  data read from an input file
- incomplete Voxware MetaSound decoder
- read EXIF metadata from JPEG
- DVB teletext decoder
- phase filter ported from libmpcodecs
- w3fdif filter
- Opus support in Matroska
- FFV1 version 1.3 is stable and no longer experimental
- FFV1: YUVA(444,422,420) 9, 10 and 16 bit support
- changed DTS stream id in lavf mpeg ps muxer from 0x8a to 0x88, to be
  more consistent with other muxers.
- adelay filter
- pullup filter ported from libmpcodecs
- ffprobe -read_intervals option
- Lossless and alpha support for WebP decoder
- Error Resilient AAC syntax (ER AAC LC) decoding
- Low Delay AAC (ER AAC LD) decoding
- mux chapters in ASF files
- SFTP protocol (via libssh)
- libx264: add ability to encode in YUVJ422P and YUVJ444P
- Fraps: use BT.709 colorspace by default for yuv, as reference fraps decoder does
- make decoding alpha optional for prores, ffv1 and vp6 by setting
  the skip_alpha flag.
- ladspa wrapper filter
- native VP9 decoder
- dpx parser
- max_error_rate parameter in ffmpeg
- PulseAudio output device
- ReplayGain scanner
- Enhanced Low Delay AAC (ER AAC ELD) decoding (no LD SBR support)
- Linux framebuffer output device
- HEVC decoder
- raw HEVC, HEVC in MOV/MP4, HEVC in Matroska, HEVC in MPEG-TS demuxing
- mergeplanes filter


version 2.0:

- curves filter
- reference-counting for AVFrame and AVPacket data
- ffmpeg now fails when input options are used for output file
  or vice versa
- support for Monkey's Audio versions from 3.93
- perms and aperms filters
- audio filtering support in ffplay
- 10% faster aac encoding on x86 and MIPS
- sine audio filter source
- WebP demuxing and decoding support
- ffmpeg options -filter_script and -filter_complex_script, which allow a
  filtergraph description to be read from a file
- OpenCL support
- audio phaser filter
- separatefields filter
- libquvi demuxer
- uniform options syntax across all filters
- telecine filter
- interlace filter
- smptehdbars source
- inverse telecine filters (fieldmatch and decimate)
- colorbalance filter
- colorchannelmixer filter
- The matroska demuxer can now output proper verbatim ASS packets. It will
  become the default at the next libavformat major bump.
- decent native animated GIF encoding
- asetrate filter
- interleave filter
- timeline editing with filters
- vidstabdetect and vidstabtransform filters for video stabilization using
  the vid.stab library
- astats filter
- trim and atrim filters
- ffmpeg -t and -ss (output-only) options are now sample-accurate when
  transcoding audio
- Matroska muxer can now put the index at the beginning of the file.
- extractplanes filter
- avectorscope filter
- ADPCM DTK decoder
- ADP demuxer
- RSD demuxer
- RedSpark demuxer
- ADPCM IMA Radical decoder
- zmq filters
- DCT denoiser filter (dctdnoiz)
- Wavelet denoiser filter ported from libmpcodecs as owdenoise (formerly "ow")
- Apple Intermediate Codec decoder
- Escape 130 video decoder
- FTP protocol support
- V4L2 output device
- 3D LUT filter (lut3d)
- SMPTE 302M audio encoder
- support for slice multithreading in libavfilter
- Hald CLUT support (generation and filtering)
- VC-1 interlaced B-frame support
- support for WavPack muxing (raw and in Matroska)
- XVideo output device
- vignette filter
- True Audio (TTA) encoder
- Go2Webinar decoder
- mcdeint filter ported from libmpcodecs
- sab filter ported from libmpcodecs
- ffprobe -show_chapters option
- WavPack encoding through libwavpack
- rotate filter
- spp filter ported from libmpcodecs
- libgme support
- psnr filter


version 1.2:

- VDPAU hardware acceleration through normal hwaccel
- SRTP support
- Error diffusion dither in Swscale
- Chained Ogg support
- Theora Midstream reconfiguration support
- EVRC decoder
- audio fade filter
- filtering audio with unknown channel layout
- allpass, bass, bandpass, bandreject, biquad, equalizer, highpass, lowpass
  and treble audio filter
- improved showspectrum filter, with multichannel support and sox-like colors
- histogram filter
- tee muxer
- il filter ported from libmpcodecs
- support ID3v2 tags in ASF files
- encrypted TTA stream decoding support
- RF64 support in WAV muxer
- noise filter ported from libmpcodecs
- Subtitles character encoding conversion
- blend filter
- stereo3d filter ported from libmpcodecs


version 1.1:

- stream disposition information printing in ffprobe
- filter for loudness analysis following EBU R128
- Opus encoder using libopus
- ffprobe -select_streams option
- Pinnacle TARGA CineWave YUV16 decoder
- TAK demuxer, decoder and parser
- DTS-HD demuxer
- remove -same_quant, it hasn't worked for years
- FFM2 support
- X-Face image encoder and decoder
- 24-bit FLAC encoding
- multi-channel ALAC encoding up to 7.1
- metadata (INFO tag) support in WAV muxer
- subtitles raw text decoder
- support for building DLLs using MSVC
- LVF demuxer
- ffescape tool
- metadata (info chunk) support in CAF muxer
- field filter ported from libmpcodecs
- AVR demuxer
- geq filter ported from libmpcodecs
- remove ffserver daemon mode
- AST muxer/demuxer
- new expansion syntax for drawtext
- BRender PIX image decoder
- ffprobe -show_entries option
- ffprobe -sections option
- ADPCM IMA Dialogic decoder
- BRSTM demuxer
- animated GIF decoder and demuxer
- PVF demuxer
- subtitles filter
- IRCAM muxer/demuxer
- Paris Audio File demuxer
- Virtual concatenation demuxer
- VobSub demuxer
- JSON captions for TED talks decoding support
- SOX Resampler support in libswresample
- aselect filter
- SGI RLE 8-bit / Silicon Graphics RLE 8-bit video decoder
- Silicon Graphics Motion Video Compressor 1 & 2 decoder
- Silicon Graphics Movie demuxer
- apad filter
- Resolution & pixel format change support with multithreading for H.264
- documentation split into per-component manuals
- pp (postproc) filter ported from MPlayer
- NIST Sphere demuxer
- MPL2, VPlayer, MPlayer, AQTitle, PJS and SubViewer v1 subtitles demuxers and decoders
- Sony Wave64 muxer
- adobe and limelight publisher authentication in RTMP
- data: URI scheme
- support building on the Plan 9 operating system
- kerndeint filter ported from MPlayer
- histeq filter ported from VirtualDub
- Megalux Frame demuxer
- 012v decoder
- Improved AVC Intra decoding support


version 1.0:

- INI and flat output in ffprobe
- Scene detection in libavfilter
- Indeo Audio decoder
- channelsplit audio filter
- setnsamples audio filter
- atempo filter
- ffprobe -show_data option
- RTMPT protocol support
- iLBC encoding/decoding via libilbc
- Microsoft Screen 1 decoder
- join audio filter
- audio channel mapping filter
- Microsoft ATC Screen decoder
- RTSP listen mode
- TechSmith Screen Codec 2 decoder
- AAC encoding via libfdk-aac
- Microsoft Expression Encoder Screen decoder
- RTMPS protocol support
- RTMPTS protocol support
- RTMPE protocol support
- RTMPTE protocol support
- showwaves and showspectrum filter
- LucasArts SMUSH SANM playback support
- LucasArts SMUSH VIMA audio decoder (ADPCM)
- LucasArts SMUSH demuxer
- SAMI, RealText and SubViewer demuxers and decoders
- Heart Of Darkness PAF playback support
- iec61883 device
- asettb filter
- new option: -progress
- 3GPP Timed Text encoder/decoder
- GeoTIFF decoder support
- ffmpeg -(no)stdin option
- Opus decoder using libopus
- caca output device using libcaca
- alphaextract and alphamerge filters
- concat filter
- flite filter
- Canopus Lossless Codec decoder
- bitmap subtitles in filters (experimental and temporary)
- MP2 encoding via TwoLAME
- bmp parser
- smptebars source
- asetpts filter
- hue filter
- ICO muxer
- SubRip encoder and decoder without embedded timing
- edge detection filter
- framestep filter
- ffmpeg -shortest option is now per-output file
  -pass and -passlogfile are now per-output stream
- volume measurement filter
- Ut Video encoder
- Microsoft Screen 2 decoder
- smartblur filter ported from MPlayer
- CPiA decoder
- decimate filter ported from MPlayer
- RTP depacketization of JPEG
- Smooth Streaming live segmenter muxer
- F4V muxer
- sendcmd and asendcmd filters
- WebVTT demuxer and decoder (simple tags supported)
- RTP packetization of JPEG
- faststart option in the MOV/MP4 muxer
- support for building with MSVC


version 0.11:

- Fixes: CVE-2012-2772, CVE-2012-2774, CVE-2012-2775, CVE-2012-2776, CVE-2012-2777,
         CVE-2012-2779, CVE-2012-2782, CVE-2012-2783, CVE-2012-2784, CVE-2012-2785,
         CVE-2012-2786, CVE-2012-2787, CVE-2012-2788, CVE-2012-2789, CVE-2012-2790,
         CVE-2012-2791, CVE-2012-2792, CVE-2012-2793, CVE-2012-2794, CVE-2012-2795,
         CVE-2012-2796, CVE-2012-2797, CVE-2012-2798, CVE-2012-2799, CVE-2012-2800,
         CVE-2012-2801, CVE-2012-2802, CVE-2012-2803, CVE-2012-2804,
- v408 Quicktime and Microsoft AYUV Uncompressed 4:4:4:4 encoder and decoder
- setfield filter
- CDXL demuxer and decoder
- Apple ProRes encoder
- ffprobe -count_packets and -count_frames options
- Sun Rasterfile Encoder
- ID3v2 attached pictures reading and writing
- WMA Lossless decoder
- bluray protocol
- blackdetect filter
- libutvideo encoder wrapper (--enable-libutvideo)
- swapuv filter
- bbox filter
- XBM encoder and decoder
- RealAudio Lossless decoder
- ZeroCodec decoder
- tile video filter
- Metal Gear Solid: The Twin Snakes demuxer
- OpenEXR image decoder
- removelogo filter
- drop support for ffmpeg without libavfilter
- drawtext video filter: fontconfig support
- ffmpeg -benchmark_all option
- super2xsai filter ported from libmpcodecs
- add libavresample audio conversion library for compatibility
- MicroDVD decoder
- Avid Meridien (AVUI) encoder and decoder
- accept + prefix to -pix_fmt option to disable automatic conversions.
- complete audio filtering in libavfilter and ffmpeg
- add fps filter
- vorbis parser
- png parser
- audio mix filter
- ffv1: support (draft) version 1.3


version 0.10:

- Fixes: CVE-2011-3929, CVE-2011-3934, CVE-2011-3935, CVE-2011-3936,
         CVE-2011-3937, CVE-2011-3940, CVE-2011-3941, CVE-2011-3944,
         CVE-2011-3945, CVE-2011-3946, CVE-2011-3947, CVE-2011-3949,
         CVE-2011-3950, CVE-2011-3951, CVE-2011-3952
- v410 Quicktime Uncompressed 4:4:4 10-bit encoder and decoder
- SBaGen (SBG) binaural beats script demuxer
- OpenMG Audio muxer
- Timecode extraction in DV and MOV
- thumbnail video filter
- XML output in ffprobe
- asplit audio filter
- tinterlace video filter
- astreamsync audio filter
- amerge audio filter
- ISMV (Smooth Streaming) muxer
- GSM audio parser
- SMJPEG muxer
- XWD encoder and decoder
- Automatic thread count based on detection number of (available) CPU cores
- y41p Brooktree Uncompressed 4:1:1 12-bit encoder and decoder
- ffprobe -show_error option
- Avid 1:1 10-bit RGB Packer codec
- v308 Quicktime Uncompressed 4:4:4 encoder and decoder
- yuv4 libquicktime packed 4:2:0 encoder and decoder
- ffprobe -show_frames option
- silencedetect audio filter
- ffprobe -show_program_version, -show_library_versions, -show_versions options
- rv34: frame-level multi-threading
- optimized iMDCT transform on x86 using SSE for for mpegaudiodec
- Improved PGS subtitle decoder
- dumpgraph option to lavfi device
- r210 and r10k encoders
- ffwavesynth decoder
- aviocat tool
- ffeval tool
- support encoding and decoding 4-channel SGI images


version 0.9:

- openal input device added
- boxblur filter added
- BWF muxer
- Flash Screen Video 2 decoder
- lavfi input device added
- added avconv, which is almost the same for now, except
for a few incompatible changes in the options, which will hopefully make them
easier to use. The changes are:
    * The options placement is now strictly enforced! While in theory the
      options for ffmpeg should be given in [input options] -i INPUT [output
      options] OUTPUT order, in practice it was possible to give output options
      before the -i and it mostly worked. Except when it didn't - the behavior was
      a bit inconsistent. In avconv, it is not possible to mix input and output
      options. All non-global options are reset after an input or output filename.
    * All per-file options are now truly per-file - they apply only to the next
      input or output file and specifying different values for different files
      will now work properly (notably -ss and -t options).
    * All per-stream options are now truly per-stream - it is possible to
      specify which stream(s) should a given option apply to. See the Stream
      specifiers section in the avconv manual for details.
    * In ffmpeg some options (like -newvideo/-newaudio/...) are irregular in the
      sense that they're specified after the output filename instead of before,
      like all other options. In avconv this irregularity is removed, all options
      apply to the next input or output file.
    * -newvideo/-newaudio/-newsubtitle options were removed. Not only were they
      irregular and highly confusing, they were also redundant. In avconv the -map
      option will create new streams in the output file and map input streams to
      them. E.g. avconv -i INPUT -map 0 OUTPUT will create an output stream for
      each stream in the first input file.
    * The -map option now has slightly different and more powerful syntax:
        + Colons (':') are used to separate file index/stream type/stream index
          instead of dots. Comma (',') is used to separate the sync stream instead
          of colon.. This is done for consistency with other options.
        + It's possible to specify stream type. E.g. -map 0:a:2 creates an
          output stream from the third input audio stream.
        + Omitting the stream index now maps all the streams of the given type,
          not just the first. E.g. -map 0:s creates output streams for all the
          subtitle streams in the first input file.
        + Since -map can now match multiple streams, negative mappings were
          introduced. Negative mappings disable some streams from an already
          defined map. E.g. '-map 0 -map -0:a:1' means 'create output streams for
          all the stream in the first input file, except for the second audio
          stream'.
    * There is a new option -c (or -codec) for choosing the decoder/encoder to
      use, which allows to precisely specify target stream(s) consistently with
      other options. E.g. -c:v lib264 sets the codec for all video streams, -c:a:0
      libvorbis sets the codec for the first audio stream and -c copy copies all
      the streams without reencoding. Old -vcodec/-acodec/-scodec options are now
      aliases to -c:v/a/s
    * It is now possible to precisely specify which stream should an AVOption
      apply to. E.g. -b:v:0 2M sets the bitrate for the first video stream, while
      -b:a 128k sets the bitrate for all audio streams. Note that the old -ab 128k
      syntax is deprecated and will stop working soon.
    * -map_chapters now takes only an input file index and applies to the next
      output file. This is consistent with how all the other options work.
    * -map_metadata now takes only an input metadata specifier and applies to
      the next output file. Output metadata specifier is now part of the option
      name, similarly to the AVOptions/map/codec feature above.
    * -metadata can now be used to set metadata on streams and chapters, e.g.
      -metadata:s:1 language=eng sets the language of the first stream to 'eng'.
      This made -vlang/-alang/-slang options redundant, so they were removed.
    * -qscale option now uses stream specifiers and applies to all streams, not
      just video. I.e. plain -qscale number would now apply to all streams. To get
      the old behavior, use -qscale:v. Also there is now a shortcut -q for -qscale
      and -aq is now an alias for -q:a.
    * -vbsf/-absf/-sbsf options were removed and replaced by a -bsf option which
      uses stream specifiers. Use -bsf:v/a/s instead of the old options.
    * -itsscale option now uses stream specifiers, so its argument is only the
      scale parameter.
    * -intra option was removed, use -g 0 for the same effect.
    * -psnr option was removed, use -flags +psnr for the same effect.
    * -vf option is now an alias to the new -filter option, which uses stream specifiers.
    * -vframes/-aframes/-dframes options are now aliases to the new -frames option.
    * -vtag/-atag/-stag options are now aliases to the new -tag option.
- XMV demuxer
- LOAS demuxer
- ashowinfo filter added
- Windows Media Image decoder
- amovie source added
- LATM muxer/demuxer
- Speex encoder via libspeex
- JSON output in ffprobe
- WTV muxer
- Optional C++ Support (needed for libstagefright)
- H.264 Decoding on Android via Stagefright
- Prores decoder
- BIN/XBIN/ADF/IDF text file decoder
- aconvert audio filter added
- audio support to lavfi input device added
- libcdio-paranoia input device for audio CD grabbing
- Apple ProRes decoder
- CELT in Ogg demuxing
- G.723.1 demuxer and decoder
- libmodplug support (--enable-libmodplug)
- VC-1 interlaced decoding
- libutvideo wrapper (--enable-libutvideo)
- aevalsrc audio source added
- Ut Video decoder
- Speex encoding via libspeex
- 4:2:2 H.264 decoding support
- 4:2:2 and 4:4:4 H.264 encoding with libx264
- Pulseaudio input device
- Prores encoder
- Video Decoder Acceleration (VDA) HWAccel module.
- replacement Indeo 3 decoder
- new ffmpeg option: -map_channel
- volume audio filter added
- earwax audio filter added
- libv4l2 support (--enable-libv4l2)
- TLS/SSL and HTTPS protocol support
- AVOptions API rewritten and documented
- most of CODEC_FLAG2_*, some CODEC_FLAG_* and many codec-specific fields in
  AVCodecContext deprecated. Codec private options should be used instead.
- Properly working defaults in libx264 wrapper, support for native presets.
- Encrypted OMA files support
- Discworld II BMV decoding support
- VBLE Decoder
- OS X Video Decoder Acceleration (VDA) support
- compact and csv output in ffprobe
- pan audio filter
- IFF Amiga Continuous Bitmap (ACBM) decoder
- ass filter
- CRI ADX audio format muxer and demuxer
- Playstation Portable PMP format demuxer
- Microsoft Windows ICO demuxer
- life source
- PCM format support in OMA demuxer
- CLJR encoder
- new option: -report
- Dxtory capture format decoder
- cellauto source
- Simple segmenting muxer
- Indeo 4 decoder
- SMJPEG demuxer


version 0.8:

- many many things we forgot because we rather write code than changelogs
- WebM support in Matroska de/muxer
- low overhead Ogg muxing
- MMS-TCP support
- VP8 de/encoding via libvpx
- Demuxer for On2's IVF format
- Pictor/PC Paint decoder
- HE-AAC v2 deco
...